PURE SINE WAVE POWER INVERTERS GT 8000 P  
Features
Un-Limited load applicability
Un-Limited batteries backup time
24 hours operation on the inverter
Parameter Pre-settable
Support solar panel
High efficiency design to save electricity
Low heat dissipation in long time operation
DC start and automatic self-diagnostic function
Multi-stage charger supports batteries up to 600AH
Low DC Voltage supports Office and Home appliances
Designed to operate under harsh environment
Optional Multiple interfaces cards available
Compatible with both linear & non-linear load
Controllable & Removable panel with LCD.
   
SPECIFICATION
VA / Watt Capacity 8.0KVA / 8000W
Input Nominal Vottage 220/230/240 Vac
Vottage
Range 		Acceptable
Vottage Range 		120Vac-270Vac
Frequency 45Hz - 70Hz Auto Sensing
Line Low Transfer 120Vac ¡Ó 2%
Line Low Retum 130Vac ¡Ó 2%
Line High Transfer 270Vac ¡Ó 2%
Line High Retum 260Vac ¡Ó 2%
Output Vottage 220/230/240 Vac
(re-settable via LCD panel)
Voltage Regulation Battery Mode:
< 3% RMS for entire battery voltage range
Frequency
Regulation 		Line Mode Synchronized to AC Main
Battery Mode 50Hz or 60Hz ¡Ó0.1Hz
Waveform Pure Sine wave
Power Factor 1.0
Effiecincy > 80%
Short Circuit
Protection 		Line Mode Circuit Breaker
Battery Mode Electronic Circuit
Overload

Protection 		Line Mode >110%, Buzzer alarm and Yellow LED blink continuously.
Battery Mode 110% ~ 150% for 30 sec. , >150% for 200ms,
then UPS shuts down.
Transfer Time(Typical) < 8 ms.
DC Start Cold start Yes.
Battery Battery Voltage 48Vdc
Backup Time 10 ~ 12 hours based on the batteries connected.
Recharging current Normal 10~20A, 60.0A Max.
Control LCD Display Operation status, I/P&O/P Voltage Frequency, Load%, Battery Voltage & %, Temperature, Model
LED Display Normal (Green), Warning (Yellow), Fault (Red)
Support solar panel Optional function
Audible
Alarm		 Battery Mode: Beeping every 4 seconds Inverter Fault: Beeping continuously
Low Battery: Beeping every second ¡@¡@Overload: Beeping twice per second
Parameter Re-settable Voltage, Frequency, 5 steps charge current
Environment Operation Temperature 0-40 degree C
Relative Humidity 0-95% non-condensing
Audible Noise Less than 55dBA (at 1M)
Physical Wall Mounted Type (W*H*D) 415*600*260
Wall Mounted Type Net Weight 53.6 Kgs
Safety (1) Safety Standard meets EN62040-1-1;
(2) EMC meets EN62040-2;
(3) Marks: CE, cUL , UL
 
BACK TO HOME